Recently, floor coverings "double standard" official enforcement, national standards acceptance and use of the wood floor coverings specification "GB/T20238-2006, as well as the Ministry of Construction," wood floor coverings engineering technical regulations "(CECS191: 2005) at the same time launched thepavement quality rules to follow. For new wood floor coverings standards, to provide consumers with the 9 simple way for the acceptance of the wooden floor pavement eligibility.
Accessories must be qualified products.
2, the thickness of the floor mat must be greater than 2mm, the overall slightly wavy.
3, the baseboard product and flooring products converge maximum gap should be less than 3mm.
4, according to the pavement standard requirements, the height difference of the product is not greater than 0.2mm.
Wallpaper blade knife Beicha horizontal and vertical seams of the floor, if you can insert may gap is too large.
6, sawing Door above the floor surface can not be greater than 1.0mm.
7, standing buckle at the sole of one foot tapping fast buckle surface, check is solid buckle.
8, the amount of the standard provisions of the floor attrition rate should normally not exceed 5%.
9, the floor and the junction of pipes and walls should be reserved for the 8-12mm telescopic crevice.